As an Amazon Associate I earn from qualifying purchases from

Aqara Curler Shade Driver E1 evaluate: Sensible curler blinds that’s zippy

The Aqara Curler Shade Driver E1 curler shutter motor could be retrofitted in a matter of minutes, making current curler shutters with pull chains a complete lot smarter. We reviewed the gadget, which prices round €60. Do take word that it isn’t obtainable formally within the US.



  • Straightforward set up course of
  • Many prospects with regards to establishing routines and automatic conduct
  • IFTTT, Homekit, Siri, Alexa, and Google Assistant help
  • Stable workmanship and reasonably priced value


  • Buttons ought to react quicker
  • Motor runs quite slowly

The Aqara Curler Shade Driver E1 in a nutshell

It would not get any simpler than this: Be aware of the thread within the stress chain of your curler blind, mark its place, glue or screw on the field, scan the QR code, and also you’re good to go. In a matter of simply ten minutes, you’ve got made your curler blind good with the Aqara Curler Shade Driver E1. The app additionally gives quite a few configuration choices and the producer gives a variety of suitable good house merchandise.

Contemplating the comparatively low-cost value of round €60, ths is a quite strong construct that doesn’t want a everlasting energy connection due to the built-in battery. If solely the motor may run a bit quicker and the buttons on the case may react a wee bit quicker, that’s all that we ask for. Nevertheless, this shouldn’t be an issue for individuals who need the curler blinds to be absolutely automated within the first place.

Aqara Roller Shade Driver E1
You possibly can management the Curler Share Driver both through the 2 buttons or through the app. / © NextPit

The Aqara Curler Shade Driver E1 is presently obtainable for round €60 in numerous on-line shops similar to Amazon. To make use of the system, additionally, you will want a hub, for instance the Aqara Hub E1, which could be discovered for simply shy of $30.

Aqara G3 Camera Hub
In our evaluate, we used this surveillance digital camera often known as Aqara G3 Digicam Hub as a Zigbee hub. / © NextPit

Setup and design

At first look, the Aqara Curler Shade Driver E1 resembles a Wiimote from Nintendo.
As a substitute of flying across the room whereas taking part in Wii Sports activities Tennis, the Curler Shade Driver prefers a extra muted persence, hanging in an unspectacular method on the wall as you progress your curler blind up and down. What’s an particularly good contact: Due to the built-in battery, you do not have to put one more ugly cable across the house.

To put in the Curler Shade Driver E1, you’ll first need to take away the plastic cap on the high finish. Beneath is the shaft of the electrical motor, on which there’s already a receptacle for the frequent curler blind bead chains. In case your curler blind makes use of a distinct sort of chain, you can find three extra adapters within the field.

Aqara Roller Shade Driver E1
Dangle the Curler Shade Driver E1 on the lowest level and mark the place on the wall, from the place you’ll be able to then connect the wall bracket. Various chain adapters are included. / © NextPit

Now all you must do is hook the Curler Shade Driver E1 into the chain of your curler blind on the lowest attainable level, holding it towards the wall and marking the underside finish of the housing with a horizontal line. Comply with that by separating the wall bracket from the housing and attaching it with the decrease finish on the marked top. This may be finished both utilizing the included adhesive pad or with two dowels and screws which can be additionally included.

Following that, merely slide the curler shutter motor again onto the wall bracket and the set up is full. With the 2 up and down buttons on the housing, now you can already remotely transfer the shutter up and down. Nevertheless, do watch out: The motor nonetheless doesn’t know the top factors can can run in each instructions infinitely.

Aqara Roller Shade Driver E1
We hooked up the wall mount for the Aqara Curler Shade Driver E1 to the wall with the included adhesive pad. It has remained firmly in place since. / © NextPit

By the best way, it was no downside within the take a look at that the axis of our curler blind and the axis of the motor are offset by 90 levels. Simply ensure that the chain is just not too tight throughout set up – the chain ought to solely have a slight stress, not be taut like a guitar string.

Setup through software program

The second a part of the setup takes place within the app. To make use of the Curler Shade Driver E1, you’ll first want a Zigbee hub. A cheap resolution is the Aqara Hub E1, which prices $29.99. Nevertheless, Aqara additionally has a number of good house merchandise in its portfolio with built-in hub, for instance the G3 Digicam Hub, which then additionally empowers you with a number of extra good tips. Extra on that later.

To arrange the Curler Shade Driver E1, all you must do is scan the QR code on the again within the app and comply with the directions on the smartphone show to set the top factors of the motor for the highest and backside positions. It took lower than two minutes to arrange the curler shutter motor within the evaluate.

Aqara Roller Shade Driver E1 Screenshots
Decide the course of motion, set the best and lowest positions – and the setup is full. / © NextPit

Now comes probably the most thrilling half:
You possibly can arrange completely different scenes and automatic conduct for the Aqara Curler Shade Driver E1.
With automated behaviour, for example, you’ll be able to have the curler shutter motor transfer to sure positions at chosen instances, similar to at 6 o’clock within the morning from fully closed to 90 p.c, to 60 p.c within the afternoon, and again to zero p.c or fully closed within the night.

You may also hyperlink different sensors to the Curler Shade Driver E1. For the reason that G3 Digicam Hub gives gesture recognition, you’ll be able to shut the curler blind with a high-five gesture. This really labored flawlessly within the evaluate. Aside from that, you can find lots of buttons and rocker switches, movement sensors, vibration sensors, door and window sensors and extra within the Aqara portfolio. Simply have a gander and see whether or not something fits your fancy.

You may also arrange chosen scenes with a number of elements, similar to for “Film”. Right here, the room will likely be robotically darkened and even perhaps have the lights within the room dimmed. These scenes can then even be managed through a voice assistant like Siri. Talking of which, the Curler Shade Driver E1 additionally helps the Apple Homekit and might thus be built-in into your Apple ecosystem. Moreover, there may be help for IFTTT in addition to Alexa Talent and Google Assistant.

Aqara Roller Shade Driver E1 Screenshots
If in case you have an Aqara digital camera with gesture management help, you’ll be able to shut the curler blind through a Excessive 5 gesture (left). The Curler Shade Driver E1 additionally helps Siri, Alexa, and Google Assistant in addition to IFTTT. / © NextPit

Aqara Curler Shade Driver E1 efficiency

By way of efficiency, there may be little or no to complain in regards to the Curler Shade Driver E1.
The motor additionally manages the quite stiff NextPit editorial curler blind with none issues. Nevertheless, the motor runs comparatively slowly. It took a great 33 seconds for our 2.20-meter-long curler blind to journey from the very backside proper to the very high. The pace could be configured in three levels within the app, however the quickest possibility was already chosen right here.

Aqara Roller Shade Driver E1
The motor has lots of energy, however doesn’t run very quick. / © NextPit

The buttons on the Curler Shade Driver may additionally react a bit quicker for my part. Every time the button is pressed, it takes a second for the motor to begin. If the curler blind runs virtually autonomously through scenes and automations, then this isn’t noticeable in any respect. Nevertheless, if you wish to exit to the balcony proper now, it must be a bit quicker.

As talked about originally, the Curler Shade Driver E1 runs on battery energy. In response to the producer, the battery lasts for 2 months if you happen to open and shut a 1.80 m lengthy curler blind as soon as a day. Sadly, we can not confirm this info because of the lack of time to carry out an endurance take a look at. Nevertheless, seeing how the battery degree dropped from 51 to 49 p.c after three days of use, the type of battery life efficiency shared by the producer does sound believable.

The battery is recharged through USB Kind-C. This implies you’ll be able to plug in a powerbank or hook it as much as an AC adapter each two months to recharge the battery fully. If in case you have an influence outlet close by, you’ll be able to after all additionally join the Curler Shade Driver to an influence adapter completely.

Ultimate verdict

It took simply 10 minutes from set up to testing it out – and the Aqara Curler Shade Driver E1 labored flawlessly as promised by the producer. The one disadvantage is the considerably gradual response. Each the keys and the motor itself ought to react and run a bit quicker in  our opinion. In view of the low buy value, nonetheless, that is simply forgiven, particularly for the reason that curler blind is never operated manually.

We will be happy to hear your thoughts

Leave a reply

Enable registration in settings - general
Compare items
  • Total (0)
Shopping cart