The right way to troubleshoot your damaged PSU – Customized Gaming & Fanatic PC Weblog

In case your PC received’t boot, there’s a superb probability that the ability provide stands out as the supply of the difficulty. In earlier movies, we’ve outlined a number of indicators that your energy provide could also be failing, however on this one, we’ll go over some primary troubleshooting to isolate and hopefully remedy the issue.

First, we’ll want to substantiate that this isn’t an area electrical concern.

1. Take a look at whether or not the issue is said to your wall socket or a blown fuse purchase plugging the PC right into a recognized working outlet
2. Affirm that the ability cable shouldn’t be the difficulty by swapping for a recognized working cable
3. Examine all energy cable connections for tightness
4. Examine the ability swap on the rear of the PSU to substantiate it’s within the | place
5. Examine the PSU for exterior put on or harm doubtlessly brought on by overheating

In the event you’ve accomplished these steps and your PC will nonetheless not boot, you possibly can carry out what’s known as a Jumper Take a look at to judge the performance of the PSU itself.

1. Fully disconnect your energy provide from the motherboard and your energy cable. For modular energy provides depart the 20-pin connector connected. You’ll want it in a sec.
2. Bend a metallic paperclip right into a U-Form
3. With the Energy Provide swap within the O place and unplugged, insert one finish of the paperclip into the inexperienced pin and the opposite right into a black pin.
4. Plug within the PSU and flip the ability swap. In case your PSU fan spins, meaning it’s getting energy and has not failed fully. This might nonetheless imply a partial failure is inflicting your points, nevertheless it might additionally imply the issue is elsewhere. If the fan doesn’t spin, it’s time to interchange that energy provide.

That’s it! Try the Velocity Micro weblog for extra PC troubleshooting suggestions and tips to assist get you again up and working.

The next two tabs change content material beneath.

Charlie has been a member of Velocity Micro’s staff since 2018. He has a love for each graphic design and PC gaming.